You spent hundreds of dollars on your Apple iPad. It’s your darling device. It’s also a very fragile device. There is a common issue with the device getting moisture trapped inside. This can cause the display screen to produce wavy lines, or dim pixels. In most cases, this problem can be fixed easily with just a few steps.
I had a case where an iPad was left in a cold car for an extended period of time. When the device was brought back inside a warm house, a bit of moisture had invaded the inside of the display. This caused the screen to function much dimmer and produce wavy lines. At times, the iPad would shut off completely. Thankfully, we were able to fix the problem.
1. Shut iPad Off and Let Dry
Since the iPad was a bit wet, we shut it completely off for two days. Hold the Sleep/Wake button until the slider appears, then power it completely off. Leave it be until it’s dry. Otherwise a short may occur and render your iPad useless.
2. Power Up
Once confident enough that enough moisture has dried out, we powered the iPad back on. We still had problems with the screen not displaying properly.
3. Stress the Screen
We cured the lines on the screen by putting the display through a rigorous “stress test”. We do this by going under “Settings” > “Brightness” and slide the brightness slider all the way to the right. We also turn “Aut0-Brightness” off.
The screen should eventually be back the way it was and free of the wavy lines. In our case, it worked after just a couple of days of rigorous use. The screen was completely back to normal.
I hope these steps work for you as well as it did for me.